Clay Blocks

Posted in Craft Supplies on 04/27/2010 02:39 pm by admin

Clay Blocks

Huge blocks of polystyrene 25 Accessories for crafts?

I need a large block of polystyrene or similar 25 x 15 x 15 cm for use in a project. Does anyone know where I can get? Also, nobody knows how the clay drying air sticks to it, or if I have to cover the polystyrene in the form of something first?

I do not know where you can get a styrofoam block that big and strong, but still you can Make Your own block of foam ps size you need (and more if you want, too.) This technique is used by many of those who "Sculpting" large items ps foam … buy at least one large piece of "extrusion" ps home improvement Foam Shop (Home Home Depot, etc.) – find the type used for some form of isolation – it must be different types, colors and thicknesses thick, but most will be about 1-2 "… (For a 2" thick sheet) cut the large sheet into 8 rectangles, each is 25 x 15 the battery and then paste them together ** (which will end in 25 x 15 x 16 However, if you must cut the top layer of the stack in half one way or simply buy or find another piece of foam that only 1 mm thick, etc. – I hope my calculation is right) … then you can continue to shape or facilitate the final block if you want with tools such as "hot wire" heat tools or other tools or scrapers, sandpaper, foam edges broken for others, etc. Check this site for more to do something of this kind of thing with ps foam: http://hotwirefoamfactory.com/customer/gallery/2_artfr.htm http://hotwirefoamfactory.com/home.php? cat = 108 … http://hotwirefoamfactory.com/home.php (and look around this site!) (If you want a lighter weight rigid foam block, do the same thing with the leaves / Layers "expanded" PS foam, although it may be harder to find and / or more expensive) As the clay air-dried to maintain it, I do not think much easier to stick to the foam directly ps .* * However, the type extruded must be accompanied by a document to "cover" for each side to protect the foam great — If you let the newspaper outside your block, at least partially up and down the block will be completed on the same paper. The paper is porous, even the clay to stick to it, you'll probably want to first paint a layer of white glue permanent (Elmers GlueAll beautiful or ModPodge, etc.), then let it dry or with a point of providing some catch-up for Clay … or Acrylic Paint should work well (probably also the latex paint – do not use paint or finish that is oil-based solvent directly on the foam, but PS and eaten, the kind that must be cleaned with paint thinner, etc., and sometimes the drivers of some aerosols also have the bad "stuff" in them.) You can also use other materials such as "Plates" instead of using paint, clay or use air dry when wet, etc. … For example, large sheets of colored paper or cardboard or cloth, etc., having the tail on the block, or a wrapper around IT, etc. (Or you can use other materials to make an empty box or frame, etc. … wire with papier mache, or bags for packing peanuts or foam peanuts PS cornstarch, etc., etc. … ps or you can use foam, but do not use solid sheets, using 4 "planks" of foam on the sides of the first layer repeatedly until they almost reached the top, then another sheet using solids, etc.) ** For more information on the use adhesives, or for more information on the use of PS foam stack, see this page:> * http://glassattic.com/polymer/covering.htm click Size, shaping, * PS foam stuck under> Plastics click on the PS foam Types category * If you are interested in Learn more about different types, brands, etc. HTH, Diane B.